Advertisement
Remove the seal from the RHT and replace.
Detach the rear section of the Front Roof shell
seal (A) by hand.
CAUTION
Danger of accident! At least two operators are
required to manually move the components of
the RHT roof, working slowly and in a
coordinated fashion.
Hold up the Rear Roof shell (1) and remove the
rod
(AV
8178) fitted previously.
Manually move the Rear Roof shell (1) toward
the front of the vehicle, bringing it over the
Front Roof shell.
Remove the rod
(AV
Loosen the four dowels indicated fastening the
two bumpers (M).
Move the two bumpers (M) towards the centre of
the rod
(AV
8178), up to the markings (8)
made with adhesive tape.
Tighten the four dowels indicated fastening the
two bumpers (M).
8178).
Advertisement
