Advertisement
Working on the inner side of the Tonneau Cover,
remove the rubber pad (3) from the left hand
bumper (A).
Undo and remove the dowel (4) fastening the left
hand bumper tang, retrieving the dowel.
Remove the left hand bumper tang (A)
completely.
The bumper is self adjusting: the next time that
the Tonneau Cover is closed into the Spider
position, the bumper tang retracts by just
enough to create the optimum gap with the
rear screen.
CAUTION
Danger of accident! At least two operators are
required to manually move the components of
the RHT roof, working slowly and in a
coordinated fashion.
Close the luggage compartment lid, pressing on
the two hooks (15) (one per side) fastening
the luggage compartment lid to the Tonneau
Cover kinematics.
Advertisement
