Advertisement
Apply and tighten the two screws (5) fastening
the right hand Tonneau Cover kinematics (A)
to the bodyshell.
Tightening torque
M8x50 screw
Fit the hydraulic pump mounting bracket (4 )and
fasten by tightening the two screws indicated.
Tightening torque
Screw
Remove the hydraulic pump (E) and the
hydraulic cylinders of the Tonneau Cover (15)
from the mounting bracket
Remove the hydraulic pump mounting bracket
(AS
107569) from the luggage compartment.
Fit the clamped hydraulic pipes (14) for the
hydraulic cylinders in their seats as originally
installed.
Connect the indicated connector to the motorised
luggage compartment striker plate (13).
Nm
Class
20 Nm
A
Nm
Class
24 Nm
B
(AS
107569).
Advertisement
