Advertisement
Checking the RHT hydraulic system fluid level
Tightening torque
Filler cap - oil tank
Before removing any fastener clamps and/or clips in the electronic system and/or hydraulic system,
note the number and position of the components to ensure that they are refitted correctly during
reassembly.
Remove the luggage compartment trim panels (
Remove the rear left hand trim panel only.
Refit the luggage compartment trim panels (
Refit the rear left hand trim panel.
Bleeding the RHT hydraulic system fluid
Tightening torque
Filler cap - oil tank
Before removing any fastener clamps and/or clips in the electronic system and/or hydraulic system,
note the number and position of the components to ensure that they are refitted correctly during
reassembly.
Plug
E4.07).
Check the fluid level in the tank with the RHT
in Coupé configuration.
The fluid level in the tank (1) must be between
MAX and MIN.
Use only the prescribed fluid - Pentosin CHF
11S.
If the fluid level is too low, remove the plug (2)
and top up with the specified fluid, using a
funnel, to the MAX level.
Bleed the RHT hydraulic system
fluid (
This operation is necessary in the event of an
excessively low fluid level.
After topping up, tighten the filler cap (2).
Tightening torque
Plug
E4.07).
Plug
Nm
2 Nm
E6.12).
Nm
2 Nm
Nm
2 Nm
Class
B
Class
B
Class
B
Advertisement
