Advertisement
Removing the NIT
Whenever an NIT or other component supplied by Becker is replaced, the replaced component must
be placed in the original packaging (use the packaging containing the new replacement unit) and
returned, to avoid the possibility of rejected warranty claims for faults which could otherwise be
suspected as being the result of impact damage.
Located at the centre of the dashboard.
Disconnect the battery (
Remove the right hand dashboard trim panel (
Refitting the NIT
Tightening torque
Fastening NIT BOSE
F2.01).
Screw
1. Turn the audio system on;
2. Press MENU H/K;
3. Select S/K system setup;
4. Press S/K HDD Management;
5. Select View available space on S/K HDD;
6. In IFS emergency mode, dotted lines are
shown instead of values for the parameters
Used, Available and Capacity, as shown in
the image aside.
E4.02).
Undo the four screws indicated fastening the NIT
(A) to the mounting bracket.
Remove the NIT (A) from the mounting bracket.
Disconnect the seven rear connectors of the NIT
(A) and remove the NIT.
Nm
Class
5 Nm
B
Advertisement
