Advertisement
After refitting the Rear Roof shell, the water tightness test must be carried out.
Refit the RHT roof headliner elements (
Replacing the Rear Roof shell skid in the vehicle
Tightening torque
Plate - Rear Roof shell skid
Eccentric nut - Rear Roof shell skid
The following procedure is for the replacement and subsequent adjustment of the left hand Rear Roof shell
skid.
The procedure for removing and adjusting the right hand Rear Roof shell skid is identical.
After adjusting the Rear Roof shell (A) correctly,
tighten the two screws (3).
Tightening torque
M8x20 screw
CAUTION
Danger of accident! At least two operators are
required to manually move the components of
the RHT roof, working slowly and in a
coordinated fashion.
Manually move the Rear Roof shell (A) toward
the rear of the vehicle.
Lock the Rear Roof shell kinematics in the safety
position, fitting the relative rod
Tighten the fastener screw (2)
Tightening torque
M8x20 screw
Connect the rear screen defrost connector (1)
and fasten the relative wiring with the clip
indicated.
E6.03).
Nut
Screw
Nm
Class
24 Nm
(AV
8178).
Nm
Class
24 Nm
Nm
Class
8 Nm
B
8 Nm
B
B
B
Advertisement
