Advertisement
Ensure that there is nothing to impede the
operation of the RHT.
Using the hydraulic hoist (OMCN Art. GP05/DE),
lift the RHT assembly by a few centimetres
and ensure that the hydraulic pump mounting
bracket is engaged with the rear kinematics
mounting bar, as shown in the image.
Ensure that there is nothing to impede the
operation of the RHT.
Lift the RHT assembly completely and set down
on the trolley
(AS
locator pins.
IMPORTANT! DO NOT tamper with the
compensator ring nuts.
NEVER tamper with the front compensator ring
nuts (25) fastening the RHT assembly.
The right hand ring nuts alone are shown in the
photo aside.
107571), on the relative
Advertisement
