Advertisement
E7.04 Preparing and painting the steel sheets
CeramiClearTM warranty repair system, conventional with sanding,for Steel substrates, total or partly respray,
for stonechipping areas and tintable surfacer.
Cleaning / Sanding
Putty / Filler
Primer
Surfacer
Basecoat(s)
Clearcoat(s)
for detailed information see chapter / section "Sanding and Cleaning".
Cleaning
Clean any old paint (OE finish) thoroughly with water first to remove any water soluble dirt.
Clean with a suitable pre-cleaner, e.g. D837 (DX330) Spirit Wipe o D845 (DX310) High
Strength Degreaser. If there is any VOC legislation in force, use D8401 Waterborne low VOC
Cleaner.
Dry Sanding (rotary-orbital machine)
Use the following paper grades depending on the substrate. Use a guide coat for best results:
Wet Sanding (manual)
Use the following paper grades depending on the substrate
Cleaning
After wet sanding rinse thoroughly with clear water. Clean with a suitable pre-cleaner, e.g. D837
DX330 Spirit Wipe o D845 DX310 High Strength Degreaser. If there is any VOC legislation in
force, use D8401 Waterborne low VOC Cleaner. Overcoat any exposed Aluminium within 4
Bare Steel
see below
Galvaplast 77
Universal 831
Deltron D821 MS /
HS
Deltron BC
Deltron D8105
Deltron D8109
Substrate Preparation and Cleaning
Steel
Galvanized Steel P320 - P400, 3M Scotch-Brite ™ red pad, 3M
Tinned Steel
Aluminium /
Magnesium
E-Coat (spare
parts)
OE Finish /
Repair Coatings
E-Coat (spare parts)
OE Finish / Repair
Coatings
Substrates
Galvanized Steel
see below
Galvaplast 77
Universal 831
Deltron D821 MS /
HS
Deltron BC
Deltron D8105
Deltron D8109
P80 - P220, 3M Scotch-Brite ™ red pad,
3M Soft Pad superfine
Soft Pad superfine
P80-P220
P150 - P220, 3M Scotch-Brite ™ red pad, 3M
Soft Pad superfine
P280 - P400, 3M Scotch-Brite ™ grey pad, 3M
Soft Pad ultrafine (faultless E-Coat requires
only cleaning)
P240 - P400, 3M Scotch-Brite ™ red pad, 3M
Soft Pad superfine
P600 - P800, 3M Soft Pad ultrafine
(faultless E-Coat requires only cleaning)
P600 - P800, 3M Soft Pad ultrafine
E-Coat (spare
parts)
see below
Deltron D821 MS /
HS
Deltron BC
Deltron D8105
Deltron D8105
Deltron D8109
Deltron D8109
OE Finish
see below
Deltron BC
Advertisement
