Advertisement
Via the specific option in the set-up menu, speedometer reading display may be disabled, enabling the
display of "RANGE" information only.
Resetting the trip odometer:
Reset the trip odometer with the TFT display control buttons.
In default screen conditions (MENU function not active), if TRIP B was disabled previously, pressing and
holding MODE directly resets the TRIP A count.
Conversely, if TRIP B was previously enabled, the value for either trip A or trip B starts to flash in area E2 of
the display, depending on which of the two was active in this area previously.
Press UP / DOWN to select between trip A and trip B, then press MODE to reset the selected trip value.
After pressing MODE, the parameter displayed previously in E2 is recalled (and updated, if following a reset).
With the trip A or trip B value flashing, to recall the parameter previously shown in area E2 without resetting
either of the TRIP values, do not press any buttons for 10 seconds.
Counter reset is not possible after key-off or with the key removed.
Selected driving mode
The driving mode selected via the Manettino is shown permanently in area A of the display, even in the event
of one or more faults.
The name of the SELECTED DRIVING MODE is shown on the display:
COMFORT;
SPORT;
Advertisement
