Advertisement
Refit the luggage compartment trim panels (
Refit the luggage compartment lid trim panel.
Replacing the motorised luggage compartment lid striker plate
Tightening torque
Fastening luggage compartment lid striker plate
Fastening DCT ECU mounting bracket
Located in the luggage compartment, under the sill protector.
Disconnect the battery (
Remove the luggage compartment trim panels (
Remove the sill protector.
E4.07).
Screw
Screw
F2.01).
Detach the cable (1) from the emergency release
mechanism (A).
Undo the two screws indicated fastening the
emergency release mechanism (A).
Remove the emergency release mechanism (A)
from the relative seat and replace.
Fit the new emergency release mechanism (A) in
the relative seat.
Tighten the two screws indicated fastening the
emergency release mechanism (A).
Tightening torque
Screw
Attach the cable (1) to the emergency release
mechanism (A).
E4.07).
Undo the three screws indicated fastening the
DCT ECU mounting bracket (A).
Remove the bracket (A) complete with the DCT
ECU, moving it aside so that it does not
hinder the subsequent operations.
Nm
Class
2 Nm
Nm
Class
20 Nm
B
9 Nm
B
C
Advertisement
