Advertisement
E6.09
Rear Roof shell kinematics
Replacing the Front Roof shell kinematics latching systems
Tightening torque
Fastening the front roof shell kinematics latching
system
Front Roof shell - roof kinematics
Headliner - Front Roof shell
Fastening deflectors
The RHT headliner elements are very sensitive to dirt and damage.
Screw
M8x20 screw
M6x18 screw
Screw
CAUTION
If the RHT open or close cycle is not completed,
the hydraulic system remains pressurised for
up to 5 minutes after the control button is
released. After this period, the system emits a
warning sound to warn the driver and any
persons in the vicinity that the system is no
longer pressurised and that components of the
RHT system may drop without warning.
Electrically bring the RHT into the intermediate
position, with the Rear Roof shell over the
Front Roof shell and with the Tonneau Cover
completely opened.
CAUTION
Danger of accident! At least two operators are
required to manually move the components of
the RHT roof, working slowly and in a
coordinated fashion.
Manually move the Front and Rear Roof shells
together toward the rear of the vehicle.
Nm
Class
4 Nm
B
24 Nm
B
9 Nm
B
5 Nm
B
Advertisement
