Advertisement
The display strategy is the same as with priority 0 events, but with the screen displayed permanently (no time-
out).
In the event of fault, the two screens are displayed in rolling order.
After a few minutes (determined by the NCP) in standby mode, the roof collapses and the TFT display
displays the specific message "Complete roof cycle" together with the vehicle symbol depicting the roof
incompletely open/closed.
This is accompanied by a warning sound, managed by the NCP.
This screen, managed by the NCP, is displayed until roof operation is resumed, by pressing the relative
control buttons, or until the roof collapses.
The display strategy is the same as with priority 0 events, but with the screen displayed permanently (no time-
out).
In the event of fault, the two screens are displayed in rolling order.
If the roof is incompletely open/closed, or the roof is collapsing and the vehicle speed exceeds the
predetermined limit, the TFT display displays the specific message "Complete roof cycle", together with
the message "Stop car for roof operation" (determined by the NCP) and the vehicle symbol depicting
the roof incompletely open/closed.
The display cycle is accompanied by a warning sound.
Operation inhibited
Roof operation is permitted only in the following conditions:
Advertisement
