Advertisement
Turn the ring knob (G) to position ON.
The connection is indicated by the warning light (H) on the instrument panel and the warning light (I) with
combined message on the TFT display.
The device is to be engaged only in 4th or 5th gear.
When driving downhill with the device engaged, it is possible that the speed of the vehicle increases
somewhat with respect to the speed in the memory.
- Storage of the speed of the vehicle
Proceed as follows.
turn the ring knob (G) on ON and, pressing the accelerator pedal, bring the vehicle to the desired speed;
turn the ring knob (L) upwards (+) for at least 3 seconds, then release it: the speed of the vehicle is stored
and it is therefore possible to release the accelerator pedal.
Advertisement
