Advertisement
Refit the Rear Roof shell seal (
Refit the seal to ensure that the rear screen is located correctly.
REACTIVATING THE PRIMER
The rear screen is supplied as a spare part with primer already applied. The screen must be used
within 3 months of the date application of the primer. The primer must be reactivated if more than 3
months have elapsed since application.
Spray DOW BETACLEAN 3300 P/N 81636500 onto the rear screen surface onto which the primer is
applied.
Wipe with clean, dry tissue or cloth containing no binding agents.
Leave the product to act for no more than 15 minutes.
E6.10).
Remove the cap from the adhesive cartridge (5)
LJF TATOLSEAL 5033 HV and heat the
polyurethane adhesive in the specific device
for at least 30 minutes.
Ensure that both mating surfaces are clean and
free of foreign contaminants.
Use an extrusion gun to apply a continuous bead
(4) of polyurethane adhesive LJF
TATOLSEAL 5033 HV, 8 and 10 mm thick,
along the adhesive application line on the
rear screen surface.
Remove the first 100 mm of adhesive to reduce
setting times.
Any gaps in the bead of adhesive must be filled
in with additional adhesive, overlapping
each side of the gap by 20 mm.
Advertisement
