Advertisement
Bring the RHT electrically into the Coupé position, completing the closing cycle.
Manually move the Rear Roof shell to bring it
over the Front Roof shell.
Manually check that the roller (2) DOES NOT
turn.
If the pawl can still turn, the striker plate must
be adjusted as the vertical position of the
striker plate (along the "Z" axis) is incorrect.
Fit the checking template
fixed part against the hook (B) and bringing
the mobile part against the Rear Roof shell
striker plate (A).
Using the checking template
that the longitudinal distance (along the "X"
axis) between the Rear Roof shell striker
plate (A) and hook (B) is 17 ± 2 mm.
If this is not the case, the striker plate must be
adjusted as the longitudinal position of the
striker plate (along the "X" axis) is incorrect.
(AV
8182), placing the
(AV
8182), check
Advertisement
