Advertisement
Refitting the cabin light
Tightening torque
Fastening cabin light
Connect the battery (
F2.01).
Screw
Place the cabin light (B) in the vehicle.
Connect the connector (2) and refit the
respective protective cover.
Connect the connector (1).
Fit the cabin light (B) in the relative seat,
pressing until it snaps audibly into place.
Tighten the three screws indicated fastening the
cabin light (B).
Tightening torque
Screw
Fit the cover (A) in its respective seat, pressing
until it snaps audibly into place.
Nm
Class
4 Nm
C
Nm
Class
4 Nm
C
Advertisement
