Advertisement
Primer Deltron D821 – 2K HS Chip Resistant [low VOC Primer Surfacer]
D104 /For detailed information see technical datasheet "104 – Deltron D821"
For detailed information see chapter / section "Sanding and Cleaning"
Hardener and thinner selection: for detailed information see chapter / section "Hardeners and
Thinners"
Mixing Ratio
Untinted
D821
HS-Hardener
Thinner
Tinted
D821
DG
HS-Hardener
Thinner
Number of coats: 2-3
Flash-off between coats at 20°C: 10 – 15 minutes
Flash-off before stoving at 20°C: 10 – 15 minutes
Drying times:
Dustfree at 20°C
Touch dry at 20°C
Through dry at 20°C
Through dry at 60°C
Through dry (IR)
Total dry film build: 70 – 110 µm (tinted: 60 – 90 µm)
Sand with P400 (dry) or P800 (wet)
Approved Topcoats to be used with this Repair System
Envirobase
Deltron D8105
Envirobase
Deltron D8105
5 vol
D821
1 vol
MS-Hardener
1 vol
Thinner
3 vol
D821
1 vol
DG
1 vol
MS-Hardener
1 vol
Thinner
35 minutes
1,5 - 2 hours (tinted: 2 – 2.5 hours)
Overnight
20 – 25 minutes; tinted: 30
minutes (metal temperature)
10 - 15 min
see technical datasheet "125 – Envirobase"
see technical datasheet "170 – Deltron D8105"
see technical datasheet "125 – Envirobase"
see technical datasheet "171 – Deltron D8109"
3 vol
1 vol
1 vol
3 vol
1 vol
1,5 vol
1 vol
Advertisement
