Advertisement
Undo the rear fastener screw (12) for the upper
lateral trim panel.
Undo the screw (13) fastening the rear seat belt
guide.
2+2 Version ONLY.
Prise out the rear seat belt guide (E) from the
upper lateral trim panel.
Undo the two screws indicated fastening the
lower part of the rear seat belt guide (E).
Remove the rear seat belt (B) from the rear seat
belt guide (E).
Pulling outwards, remove the lateral upper trim
panel from its seat, detaching the respective
mounting bracket from the rubber spacer (H).
Note the position of the upper lateral trim panel
mounting bracket relative to the respective
seat on the rubber spacer (H).
Advertisement
