This LSI incorporates a custom infra-red interface (CIR). The CIR has various functions for
receiving the IR signal in NEC format.
16.1
Features
• Supports reception of the IR signal in NEC format
• Sampling clock selectable
Selectable from internal clocks φ, φ/2, and φ/4, and subclock (φ
• Noise canceling function
Input noise can be filtered out by using a maximum of four stages of filters.
• Polarity inversion of the input signal supported
• 18-byte FIFO incorporated
• Six interrupt sources: receive end, framing error, overrun error, repeat detection, abort
generation, and header detection
Interrupt sources can be specified by checking each flag.
Figure 16.1 is a block diagram of the CIR.
Section 16 CIR Interface
Section 16 CIR Interface
)
SUB
Rev. 1.00 Apr. 28, 2008 Page 469 of 994
REJ09B0452-0100