Fsi General-Purpose Registers 1 To F (Fsigpr1 To Fsigprf); Fsi Lpc Control Register (Slcr) - Renesas H8S/2100 Series Hardware Manual

21.3.16 FSI General-Purpose Registers 1 to F (FSIGPR1 to FSIGPRF)

FSIGPR1 to FSIGPRF store data such as the result of FSI command interrupt processing.
• FSIGPR1 to FSIGPRF
Bit Bit Name
7 to 0 bit 7 to bit 0 All 0

21.3.17 FSI LPC Control Register (SLCR)

SLCR enables or disables the LPC host interface function of the FSI, FSI interrupt enable bit, and
FSI operation mode control bit.
Bit Bit Name
7 FSILIE
6 FSICMDIE 0
5 FSIWIE
R/W
Initial
Value EC Host Description
R/W R
R/W
Initial
Value EC Host Description

0 R/W

R/W

0 R/W
These bits store results of FSI command interrupt
processing.
FSI LPC Interface Enable
Enables or disables the LPC host interface function of
the FSI. When disabled, address-matching is not
performed and Sync is not returned.
0: Disables the LPC host interface function.
1: Enables the LPC host interface function.
FSI Command Interrupt Enable
0: Disables the FSI command interrupt.
1: Enables the FSI command interrupt.
FSI Write Interrupt Enable
0: Disables the FSI write interrupt.
1: Enables the FSI write interrupt.
Rev. 1.00 Apr. 28, 2008 Page 699 of 994
Section 21 FSI Interface
REJ09B0452-0100