Rep 13.6.1 Feed/Retard/Nudger Roll (Ttm) - Xerox WorkCentre 7132 Service Documentation

REP 13.6.1 Feed/Retard/Nudger Roll (TTM)

Parts List on PL 15.7
Removal
To avoid personal injury or shock, do not perform repair or adjustment with electrical
power applied to the machine.
NOTE: The Feed, Retard, and Nudger Roll must be replaced at the same time.
1. Remove the Paper Tray of the Feed Roll, Retard Roll, and Nudger Roll to be removed.
• Tray 2 (REP 13.1.1)
• Tray 3 (REP 13.1.2)
2. Pull out tray and remove paper.
3. Move the Front Chute in the direction of the arrow. (Figure 1)
1. Move the Front Chute.
Reversion 4.0
WorkCentre 7132
WARNING
Figure 1 Moving the Front Chute
4. Remove the Feed/Retard/Nudger Roll. (Figure 2)
1. Release the hooks (3) to remove the Feed Roll/Retard/Nudger Roll.
January 2007
4-119
Repairs/Adjustments
REP 13.6.1