Xerox WorkCentre 7132 Service Documentation page 693

073-212 Tray 3 Ready RAP
BSD-ON:3.3
There is a Tray 3 ready failure.
Procedure
Check the circuits between P/J413 on the MCU PWB and P/J541 (2TM) or P/J541 (TTM) on
the Tray Module PWB (Flag 5, Flag 6) for an open circuit or short circuit failure. Repair as
required.
If the problem persists disconnect and reconnect P/J541 on the Tray Module PWB.
Status-indicator-raps Revision
January 2007
073-212
2-660 WorkCentre 7132