Rep 15.1.2 Dadf Platen Cushion - Xerox WorkCentre 7132 Service Documentation

REP 15.1.2 DADF Platen Cushion

Parts List on PL 16.1
Removal
To avoid personal injury or shock, do not perform repair or adjustment with electrical
power applied to the machine.
NOTE: The DADF Platen Cushion pasted on with Velcro Fastening.
Reversion 4.0
WorkCentre 7132
WARNING
1. Remove the DADF Platen Cushion. (Figure 1)
1. Peel off the DADF Platen Cushion from the Velcro Fastening at 10 locations.
Figure 1 Removing the DADF Platen Cushion
2. Paste the DADF Platen Cushion. (Figure 2)
1. Place the DADF Platen Cushion on the Platen Glass.
2. Set up the gaps from the Registration Guide and Platen Guide.
3. Slowly lower the DADF and press on to the Platen Cushion.
January 2007
4-125
Repairs/Adjustments
REP 15.1.2