Xerox WorkCentre 7132 Service Documentation page 904

133-280 Fax Option Slot 1 Board RAP
BSD-ON:17.1
Failure was detected on the Fax Option Slot 1 board.
Procedure
Pull out and insert the FCB PWB (PL 11.3) Switch on the power. The problem persists.
Y N
Service Call Procedures.
Check the connection of each FCB PWB (PL 11.3) connector. The connectors are securely
connected.
Y N
Connect the connectors.
Turn on the power again. The problem persists.
Y N
Service Call Procedures.
Replace the FCB PWB (PL 11.3).
Revision
WorkCentre 7132
133-281 Received unknown message RAP
BSD-ON:17.1
A message not specified in I/F settings was received from the Fax Card.
Procedure
Pull out and insert the FCB PWB (PL 11.3) Switch on the power. The problem persists.
Y N
Service Call Procedures.
Check the connection of each FCB PWB (PL 11.3) connector. The connectors are securely
connected.
Y N
Connect the connectors.
Turn on the power again. The problem persists.
Y N
Service Call Procedures.
Replace the FCB PWB (PL 11.3).
January 2007
2-871
Status-indicator-raps
133-280, 133-281