Figure 5 Disconnecting the connector
8.
Remove the Tray 2 Feeder. (Figure 6)
1.
Remove the screws (2).
2.
Remove the Tray 2 Feeder.
Reversion 4.0
WorkCentre 7132
Figure 6 Removing the Tray 2 Feeder
Replacement
1.
To install, carry out the removal steps in reverse order.
2.
When replacing, enter Diag. mode. Clear the counter.
January 2007
4-103
Repairs/Adjustments
REP 12.1.1