Rep 16.12.1 Finisher Pwb - Xerox WorkCentre 7132 Service Documentation

Figure 3 Removing the Paddle Gear Shaft
Repairs/Adjustments
REP 16.11.1, REP 16.12.1

REP 16.12.1 Finisher PWB

Parts List on PL 17.12
Removal
To avoid personal injury or shock, do not perform repair or adjustment with electrical
power applied to the machine.
Check that "Ready to Copy" is displayed on the Control Panel display.
1. Remove the Rear Cover. (REP 16.4.1)
2. Disconnect the connectors. (Figure 1)
1. Disconnect the connectors (x10).
2. Release the Edge Saddles (x4) to remove the wire.
Figure 1 Disconnecting the connectors
January 2007
4-184
WARNING
CAUTION
Reversion 4.0
WorkCentre 7132