Xerox WorkCentre 7132 Service Documentation page 1520

Table 1 Pattern Outline
Output Color and paper size available for this
No. Pattern Name pattern
54 Process Control 4C
55 HT-Chart1-K2 4C
56 HT-Chart2-K2 4C
57 HT-Chart3-K2 4C
58 K Grid Pattern 4C
59 HT Page 4C, 4C, K, Y, C, M, R, G, B Half Tone Density Set
by Cin%
60 HT stripe and ROS 4C
lines
61 Color Regi Chart 4C
Rev. 72
91 Process Control 4C
NOTE: •(*1): Displays 294mmx17inch (A3 breadth x Ledger length) (means that A3 and Led-
ger are both supported sizes)
• Prints only from the specified tray. (ATS and APS are not processed.)
• If there was an invalid print specification in 1, an error occurs.
• Prints in the paper size of the selected tray. (Print areas outside the paper size will not be
printed)
• If the Finisher is installed, No Paper Run cannot be processed. No Paper Run is con-
trolled by dummy 8.5x11LEF timing regardless of whether there is paper or paper size.
• If IOT Built-in PG is specified, 2 Sided (Dup) is prohibited when specifying MSI.
(*1):Length is longer than A4 length and breadth is longer than Letter breadth.
Reversion 4.0
WorkCentre 7132
Webpage Administrator Password
Built-in Image
Required to change settings on machine.
Sub
User Name: (five one's) 11111
IOT
IOT
Password: x-admin
IOT
IOT
IOT
IOT
IOT
IOT
IOT
January 2007
Test Pattern Print, Webpage Administrator Pass-
6-197
General procedures information