Xerox WorkCentre 7132 Service Documentation page 1036

Figure 2 Removing the APS Sensor
4. Disconnect the CCD Flat Cable. (Figure 3)
1. Take off the hook.
2. Disconnect the CCD Flat Cable.
Reversion 4.0
WorkCentre 7132
Sensor
5. Replace the Lens Kit Assembly. (Figure 4)
1.
2.
3.
January 2007
4-85
Figure 3 Disconnecting the FFC CCD Cable
Remove the screws (4).
Remove the Lens Kit Assembly.
Observe the orientation of the Lens Kit Assembly.
Repairs/Adjustments
REP 11.4.1