Figure 5 Removing the Knob Screws
7.
Remove the Tray Guide. (Figure 6)
1.
Remove the screws (x4).
2.
Remove the rivet to remove the clamp.
3.
Remove the wire from the hole.
4.
Remove the Tray Guide.
Reversion 4.0
WorkCentre 7132
Figure 6 Removing the Tray Guide
8.
Remove the Set clamp clutch. (Figure 7)
1.
Remove the clamp.
2.
Remove the screw.
3.
Remove the spring.
January 2007
4-163
Repairs/Adjustments
REP 16.5.2