Rep 16.10.1 Stacker Motor Assembly - Xerox WorkCentre 7132 Service Documentation

REP 16.10.1 Stacker Motor Assembly

Parts List on PL 17.10
Removal
To avoid personal injury or shock, do not perform repair or adjustment with electrical
power applied to the machine.
Check that "Ready to Copy" is displayed on the Control Panel display.
1. Remove the Rear Cover. (REP 16.4.1)
2. Slide the gear to lower down the Stacker Tray. (Figure 1)
1. Slide the gear to disengage the teeth of Cam.
Figure 1 Moving the gear
3. Remove the bracket. (Figure 2)
1. Remove the screw.
Reversion 4.0
WorkCentre 7132
WARNING
CAUTION
2. Loosen the screws (x2).
3. Remove the bracket.
4. Remove the screws. (Figure 3)
1. Remove the screws (x2).
2. Loosen the screw.
January 2007
4-179
Figure 2 Removing the bracket
Repairs/Adjustments
REP 16.10.1