REP 15.4.2 Top Cover Assembly
Parts List on PL 16.5
Removal
To avoid personal injury or shock, do not perform repair or adjustment with electrical
power applied to the machine.
1.
Open the Top Cover Assembly.
2.
Remove the following covers:
•
DADF Front Cover (REP 15.2.3)
•
DADF Rear Cover (REP 15.2.4)
3.
Remove the Feed Upper Chute. (Figure 1)
1.
Remove the screw (1).
2.
Remove the Feed Upper Chute.
3.
Take note of the following at installation:
A. Insert the Boss into the U-groove.
B. Insert the Tab into the Tab Slot.
Reversion 4.0
WorkCentre 7132
WARNING
Figure 1 Removing the Feed Upper Chute
4.
Remove the Harness Guide. (Figure 2)
1.
Loosen the screw.
2.
Remove the Earth Wire.
3.
Remove the Tapping Screw (1).
4.
Unfasten the Harness Guide.
January 2007
4-137
Repairs/Adjustments
REP 15.4.2