Xerox WorkCentre 7132 Service Documentation page 1145

Figure 3 Remove the A-Finisher (af422106)
Replacement
1. Reverse the removal procedure for replacement.
Repairs/Adjustments
REP 22.1, REP 22.3.1
REP 22.3.1 Paddle Belt
Parts List on PL 22.3
Removal
To avoid personal injury or shock, do not perform repair or adjustment with electrical
power applied to the machine.
Before turning OFF the power switch, note the following to prevent loss of customer data.
[with the FAX function]
Check that the "Job in Memory" lamp is off. Press the "Job Status" button and check that no job
is in progress.
[with the Printer function]
Check that "Ready to print/send" is displayed on the Control Panel.
1. Remove the A-Finisher from the machine. (REP 22.1)
2. Remove the Compile Assembly. (REP 22.9.1)
3. Remove the front Pulley. (Figure 1)
(1)Remove E-Clip.
(2)Remove Flange.
(3)Remove Belt from Pulley.
(4)Remove Pulley.
Figure 1 Removing the Pulley (j0fa42201)
January 2007
4-194
WARNING
CAUTION
Reversion 4.0
WorkCentre 7132