Xerox WorkCentre 7132 Service Documentation page 851

123-373 Channel RAP
There is an error in the channel sent from the Controller.
Initial Actions
Power Off/On
Procedure
Disconnect and reconnect the electrical connections on the UI PWB (PL 13.2) and P/J388 on
the ESS PWB (PL 11.2)
If the problem persists reload Software (ADJ 9.3.1).
If the problem persists replace the ESS PWB (PL 11.2).
Status-indicator-raps
123-373, 123-374
123-374 User Job ID RAP
There is an error in the Job ID parameter sent from the Controller.
Initial Actions
Power Off/On
Procedure
Disconnect and reconnect the electrical connections on the UI PWB (PL 13.2) and P/J388 on
the ESS PWB (PL 11.2)
If the problem persists reload Software (ADJ 9.3.1).
If the problem persists replace the ESS PWB (PL 11.2).
January 2007
2-818
Revision
WorkCentre 7132