Rep 11.6.2 Lamp Wire Harness - Xerox WorkCentre 7132 Service Documentation

REP 11.6.2 Lamp Wire Harness

Parts List on PL 13.6
Removal
To avoid personal injury or shock, do not perform repair or adjustment with electrical
power applied to the machine.
1. Remove the DADF. (REP 15.1.1)
2. Remove the Platen Glass. (REP 11.3.1)
3. Remove the Lens Cover. (Figure 1)
1
Loosen the screws (6)
Figure 1 Removing Lens Cover
4. Remove the IPS Cover. (Figure 2)
1. Remove the screws (2).
2. Remove the IPS Cover.
Reversion 4.0
WorkCentre 7132
WARNING
2
Remove the cover
Figure 2 Removing the IPS Cover
5. Disconnect the connector of the Lamp Wire Harness. (Figure 3)
1. Disconnect the connector.
January 2007
4-97
1
Remove the screws (2)
2
Remove the Cover
Repairs/Adjustments
REP 11.6.2