Xerox WorkCentre 7132 Service Documentation page 1197

Color-to-Color Mis-registration on the Trail Edge of the page
Table 2 Trail Edge NVM Settings
NVM Default Settings
760-091 87
760-094 55000
760-101 20235
1. If the K color is shifted to the Lead Edge relative to the colors M and C, decrease the
value of the following NVM; (Figure 4)
NOTE: An NVM increment of 16 will move the K color by 0.1mm.
• 760-101
2. If the K color is shifted to the Trail Edge relative to the colors M and C, increase the value
of the following NVM; (Figure 5)
NOTE: An NVM increment of 16 will move the K color by 0.1mm.
• 760-101
3. If the Y color is shifted to the Trail Edge relative to the colors M and C, decrease the value
of NVM 760-091 and increase the value of NVM 760-094. (Figure 4)
• For the NVM 760-091, a decrease of 9 will move the Y color by 0.1mm.
• For the NVM 760-094, an increase of 20,000 will move the Y color by 0.1mm.
4. If the Y color is shifted to the Lead Edge relative to the colors M and C, increase the value
of NVM 760-091 and decrease the value of NVM 760-094. (Figure 5)
• For the NVM 760-091, an increase of 9 will move the Y color by 0.1mm.
• For the NVM 760-094, a decrease of 20,000 will more the Y color by 0.1mm.
Repairs/Adjustments
ADJ 9.1.7
Setting Range
0 to 200
(100 or above is
not recommended)
0 to 100,000
20139 to 20274
The color K is shifted toward the
Lead Edge.
January 2007
4-246
0.5mm
The color Y is shifted toward the
Trail Edge.
Figure 4 Shift of colors K and Y
Reversion 4.0
WorkCentre 7132