Xerox WorkCentre 7132 Service Documentation page 989

Move these BTR2 Bracket aside to
access the screws (2) to remove the
cross brace.
Figure 3 Removing the cross brace.
8. Use the cross bar as a foot by inserting it through the holes in the IBT Module frame and
stand the Module on its end as shown. (Figure 4)
Repairs/Adjustments
REP 4.2.5
Cross bar
Figure 4 Using the cross bar as a foot
9. Remove the inner bracket. (Figure 5)
January 2007
4-38
Reversion 4.0
WorkCentre 7132