Xerox WorkCentre 7132 Service Documentation page 808

116-388 MCC RAP
The control logic detected that the HDD is not installed during an MCC operation (Mail Con-
tents Creator).
Initial Actions
Power Off/On
Procedure
Check the electrical connections on the HDD (PL 11.2).
If the problem persists perform Hard Disk Diagnostic Program.
If the problem persists replace the HDD (PL 11.2).
Revision
WorkCentre 7132
116-389 RAM Install RAP
The control logic detected that the required RAM capacity is not installed or available.
Initial Actions
Power Off/On
Procedure
Reinstall or replace the DIMM (PL 11.2).
If the problem persists reload Software (ADJ 9.3.1).
If the problem persists, replace the ESS PWB (PL 11.2).
January 2007
2-775
Status-indicator-raps
116-388, 116-389