Rep 1.1.2 Drum Drive Assembly - Xerox WorkCentre 7132 Service Documentation

REP 1.1.2 Drum Drive Assembly

Parts List on PL 1.1
Removal
To avoid personal injury or shock, do not perform repair or adjustment with electrical
power applied to the machine.
1. Switch off the power and disconnect the power cord.
2. Remove the ESS PWB Cover (PL 12.2) the MCU PWB Cover (PL 11.2).
3. Remove the MCU PWB Chassis (REP 9.1.1)
4. Remove the ESS PWB Assembly. (REP 9.2.1)
5. Remove the screws (2) and remove the support bracket. (Figure 1)
1
Remove the screws (2) then
remove the bracket.
Figure 1 Removing the support bracket
6. Disconnect the connectors (7) from the Drum Drive Assembly. (Figure 2)
Repairs/Adjustments
REP 1.1.2
WARNING
1
Disconnect the con-
nectors (4)
Figure 2 Disconnect the connectors (7)
7. Disconnect the cable from the cable clamps or remove the cable ties from the Drum Drive
Assembly. (Figure 3)
January 2007
4-10
2
Disconnect the connec-
tors (3)
Reversion 4.0
WorkCentre 7132