Xerox WorkCentre 7132 Service Documentation page 1151

REP 22.4.2 Staple Assembly
Parts List on PL 22.4
Removal
To avoid personal injury or shock, do not perform repair or adjustment with electrical
power applied to the machine.
Before turning OFF the power switch, note the following to prevent loss of customer data.
[with the FAX function]
Check that the "Job in Memory" lamp is off. Press the "Job Status" button and check that no job
is in progress.
[with the Printer function]
Check that "Ready to print/send" is displayed on the Control Panel.
1. Remove the A-Finisher from the machine.
2. Remove the Inner Front Cover. (PL 22.1)
3. Remove the Staple Assembly. (Figure 1)
(1)Remove Clamps (2).
(2)Disconnect Connectors (2).
(3)Remove Screws (2).
(4)Remove Staple Assembly.
Figure 1 Removing the Staple Assembly (j0fa42219)
4. Remove the Bracket from the Staple Assembly. (Figure 2)
(1)Remove Screws (2).
Repairs/Adjustments
REP 22.4.2
WARNING
CAUTION
(2)Remove Bracket.
Figure 2 Removing the Bracket (j0fa42220)
Replacement
1. Reverse the removal procedure for replacement.
January 2007
4-200
Reversion 4.0
WorkCentre 7132