Xerox WorkCentre 7132 Service Documentation page 633

045-329 Marking C RAP
BSD-ON:6.4/6.5
There is a marking C plate error.
Procedure
Check the connections and wiring between the MCU PWB and the ROS Unit. The
tions and wiring are OK.
Y N
Repair replace as required (PL 11.1, PL 3.1).
Replace the MCU PWB (PL 11.1). If the problem continues, replace the ROS Unit (PL 3.1).
Status-indicator-raps
045-329, 045-330
045-330 Marking K RAP
BSD-ON:6.4/6.5
There is a marking K plate error.
Procedure
connec- Check the connections and wiring between the MCU PWB and the ROS Unit. The
tions and wiring are OK.
Y N
Repair replace as required (PL 11.1, PL 3.1).
Replace the MCU PWB (PL 11.1). If the problem continues, replace the ROS Unit (PL 3.1).
January 2007
2-600
connec-
Revision
WorkCentre 7132