Rep 16.6.1 Decurler Roll - Xerox WorkCentre 7132 Service Documentation

REP 16.6.1 Decurler Roll

Parts List on PL 17.6
Removal
To avoid personal injury or shock, do not perform repair or adjustment with electrical
power applied to the machine.
Check that "Ready to Copy" is displayed on the Control Panel display.
1. Remove the following parts:
• Front Cover Assembly (REP 16.1.2)
• Rear Cover (REP 16.4.1)
2. Remove the Top Cover. (Figure 1)
1. Loosen the screws (x4).
2. Remove the Top Cover.
Repairs/Adjustments
REP 16.6.1
WARNING
CAUTION
Figure 1 Removing the Top Cover
3. Remove the arm. (Figure 2)
1. Remove the spring.
2. Remove the E-Clip.
3. Remove the arm.
January 2007
4-166
Reversion 4.0
WorkCentre 7132