Rep 15.2.1 Dadf Document Tray - Xerox WorkCentre 7132 Service Documentation

Figure 2 Installing the DADF Platen Cushion
Replacement
1. To install, carry out the removal steps in reverse order.
Repairs/Adjustments
REP 15.1.2, REP 15.2.1

REP 15.2.1 DADF Document Tray

Parts List on PL 16.2
Removal
To avoid personal injury or shock, do not perform repair or adjustment with electrical
power applied to the machine.
1. Remove the following parts:
• DADF Front Cover (REP 15.2.3)
• DADF Rear Cover (REP 15.2.4)
2. Open the Top Cover.
3. Disconnect the connectors. (Figure 1)
1. Remove the clamp.
2. Disconnect P/J760.
3. Disconnect P/J759.
4. Disconnect the screw (1).
5. Remove the Earth Wire.
6. Unhook the Wire Harness (x2).
January 2007
4-126
WARNING
Reversion 4.0
WorkCentre 7132