Xerox WorkCentre 7132 Service Documentation page 636

045-335 Marking Fuser Communication RAP
BSD-ON:
There is a marking/fuser communication error.
Procedure
Check the connections and wiring between the MCU PWB and the Fuser. The
and wiring are OK.
Y N
Repair replace as required (PL 11.1, PL 3.1).
Replace the Fuser (PL 5.1). If the problem continues, replace the MCU PWB (PL 11.1).
Revision
WorkCentre 7132
045-336 Marking ROS Communication RAP
BSD-ON:6.4/6.5
There is a marking/ROS communication ROS error.
Procedure
connections Check the connections and wiring between the MCU PWB and the ROS Unit. The
tions and wiring are OK.
Y N
Repair replace as required (PL 11.1, PL 3.1).
Replace the MCU PWB (PL 11.1). If the problem continues, replace the ROS Unit (PL 3.1).
January 2007
2-603
connec-
Status-indicator-raps
045-335, 045-336