•
Monotone image over the whole print with coverage between 40 and 60%.
•
High temperature and high humidity.
Corrective Action
If the defect is worse than the defect sample, replace the Developer Unit (PL 5.2).
Image Quality
Auger Marks Defect (Black), Auger Marks Defect (Ma-
Auger Marks Defect (Magenta)
Figure 1 Auger Marks Image Defect Sample (VA-003)
Cause
Auger marks may appear on the prints when the amount of toner becomes low in the Devel-
oper Unit.
The following conditions increase the defect:
•
Monotone image over the whole print with coverage between 40 and 60%.
January 2007
3-30
Reversion 4.0
WorkCentre 7132