Xerox WorkCentre 7132 Service Documentation page 834

121-340 EP Accessory Mismatch RAP
The combination of accessories that are installed does not match the specifications.
Initial Actions
Power Off/On
Procedure
Check the electrical connections on the HDD (PL 11.2)
If the problem persists reload Software (ADJ 9.3.1).
If the problem persists perform Hard Disk Diagnostic Program.
If the problem persists reinstall or replace the EPSV-IF board (PL 11.2).
If the problem persists pull out and insert or replace the DDR DIMM (PL 11.2).
If the problem persists replace the ESS PWB (PL 11.2).
Revision
WorkCentre 7132
121-350 EPSV Logic HDD RAP
A fatal error was detected.
Initial Actions
Power Off/On
Procedure
Check the electrical connections on the HDD (PL 11.2)
If the problem persists reload Software (ADJ 9.3.1).
If the problem persists perform Hard Disk Diagnostic Program.
If the problem persists reinstall or replace the EPSV-IF board (PL 11.2).
If the problem persists pull out and insert or replace the DDR DIMM (PL 11.2).
If the problem persists replace the ESS PWB (PL 11.2).
January 2007
2-801
Status-indicator-raps
121-340, 121-350