Xerox WorkCentre 7132 Service Documentation page 742

091-915 Xero CRUM Data RAP
BSD-ON:9.1
The Control Logic detected incorrect data on the Xero CRUM.
Initial Actions
Check NVM location 740-047, for Geographic area:
• NA/EU = 3
• DMO-E/W = 12
• All the World = 512
Check NVM location 740-049, for Contact Type:
• Metered = 3
• Sold = 2
• Neutral = 31
Procedure
Pull out and reinstall the Xerographics Drum Module. The problem persists.
Y N
Return to Service Call Procedures.
An incorrect Xerographics Drum Module was just installed. Install the correct Xerographics
Drum Module.
Revision
WorkCentre 7132
091-916 Xero CRUM Match RAP
BSD-ON:9.1
The Control Logic detected mismatched data on the Xero CRUM.
Initial Actions
Check NVM location 740-047, for Geographic area:
• NA/EU = 3
• DMO-E/W = 12
• All the World = 512
Check NVM location 740-049, for Contact Type:
• Metered = 3
• Sold = 2
• Neutral = 31
Procedure
Pull out and reinstall the Xerographics Drum Module. The problem persists.
Y N
Return to Service Call Procedures.
An incorrect Xerographics Drum Module was installed. Verify the position of the Xerographics
Drum Module. Install the correct Xerographics Drum Module.
January 2007
2-709
Status-indicator-raps
091-915, 091-916