ADJ 9.1.10 Procon ON/OFF Print
Purpose
The purpose of this routine is to determine the proper functioning of the ADC Sensor, ADC
Patch, ADC Shutter open and close, ADC Mini Setup, TC Patch, and the environment Temper-
ature and Humidity. These machine parameters must be functioning properly before Max
Setup can be run.
Procon is Process Control and Process Control on this product is the Tone Reproduction Con-
trol (TRC).
Adjustment
1.
Enter UI Diagnostic Mode.
2.
Select Max Setup and select Procon "On/Off" Print.
3.
Select Procon "ON" Print.
4.
Press the Start button.
5.
When the routine is completed, check the print out test pattern (Test Pattern # 53)
Ensure that all colors (YMCK) have printed and Process Black is present in two places.
(Figure 1)
Repairs/Adjustments
ADJ 9.1.10
Figure 1 Checking the test pattern for YMCK and Process Black printout.
January 2007
4-250
Reversion 4.0
WorkCentre 7132