Xerox WorkCentre 7132 Service Documentation page 796

116-360 SMB Software RAP
An internal shutdown occurred after a SMB (Server Message Block) processing error.
Initial Actions
Power Off/On
Procedure
Pull out and insert or replace the DIMM (PL 11.2).
If the problem persists reload Software (ADJ 9.3.1).
If the problem persists, replace the ESS PWB (PL 11.2).
Revision
WorkCentre 7132
116-361 Spool HDD RAP
The controller spool detected an error during HDD access.
Initial Actions
Power Off/On
Procedure
Check the HDD electrical connections (PL 11.2).
If the problem persists perform Hard Disk Diagnostic Program.
If the problem persists replace the HDD (PL 9.2).
January 2007
2-763
Status-indicator-raps
116-360, 116-361