Xerox WorkCentre 7132 Service Documentation page 1165

Figure 1 Removing the Upper Frame Section (af422101)
NOTE: The screws do not thread into the Upper Chute. They are used like pins to secure
the Upper Chute in place.
6. Remove the Upper Chute Assembly. (Figure 2)
(1)Remove Screws (2).
(2)Remove Screw.
(3)Carefully Remove the Upper Chute Assembly.
Repairs/Adjustments
REP 22.6.2
Figure 2 Removing the Upper Chute Assembly (af422100)
Replacement
1. Reverse the removal procedure for replacement.
NOTE: Ensure that the Paper Guides (PL 22.6) are not folded back on top of the Exit Roll
Assembly (PL 22.5).
January 2007
4-214
Reversion 4.0
WorkCentre 7132