Xerox WorkCentre 7132 Service Documentation page 1099

Figure 2 Moving the motor unit
8. Open the chute.
9. Remove the Feed Guide. (Figure 3)
1. Remove the screws (2).
2. Remove the Feed Guide.
Repairs/Adjustments
REP 15.8.1
Figure 3 Removing the Feed Guide
10. Remove the sensor holder. (Figure 4)
1. Remove the Tapping Screws (2).
2. Remove the sensor holder.
January 2007
4-148
Reversion 4.0
WorkCentre 7132